Home News Aerosol Jet Druckkopf zur Produktion von künstlichen Muskeln

Aerosol Jet Druckkopf zur Produktion von künstlichen Muskeln

Der Hersteller Optomec liefert dem Factory Automation and Production Systems (FAPS) Institut der Friedrich-Alexander-Universität in Erlangen, Nürnberg einen Aerosol Jet Druckkopf.

Dieser soll dazu eingesetzt werden die Forschung zur Erstellung von künstlichen Muskelgewebe weiter anzutreiben. Forscher der Universität Illinois haben aus Muskelgewebe kleine Roboter gebaut. Die Forschung zur Erstellung von künstlichen Muskelgewebe könnte die Entwicklung der Softbots, wie die kleinen Roboter genannt werden, weiter voran treiben.

Hier die ganze Pressemeldung:

ALBUQUERQUE, N.M.–(BUSINESS WIRE)–Optomec, a leading provider of production grade additive manufacturing systems, today announced that the Factory Automation and Production Systems (FAPS) Institute at Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU) has purchased an Aerosol Jet Quad Print Engine. The versatile print engine will be used to develop an automated production environment for the manufacturer of artificial muscles (also known as Dielectric Elastomer Actuators – DEAs) that can be used in robots, games and medical applications. Because the production of DEAs requires printing of ultra thin layers of elastomer film, silicone and electrodes, the ability of Aerosol Jet technology to print a variety of materials and at dimensions below 10 microns make it ideally suited for the artificial muscle application.

“We’re pleased to see the unique capabilities of Aerosol Jet technology being applied to the exciting area of DEAs and helping develop production grade manufacturing environments for their implementation”

Aerosol Jet technology is a non-contact direct write printing process capable of directly depositing a wide range of commercial and custom electronic materials, including conductor, insulator and biologic formulations, onto virtually any substrate. Aerosol Jet technology can print a variety of feature sizes ranging from less than 10 microns to more than one centimeter using patented aerodynamic focusing nozzles. Due to its ability to handle electronic and biomaterials within the same material deposition system, Aerosol Jet systems offer a unique biomedical micro-device development and production solution that bridges these disciplines.

Engineers at FAPS are looking to Aerosol Jet technology to help facilitate the transition of DEAs from fundamental research to their qualification as regular control elements for use in complex and compliant robots and in lightweight biomimetic prostheses. This requires the development of an automated production processes for stacked DEAs that can meet their challenging implementation requirements.

The Aerosol Jet Print Engine is Optomec’s workhorse technology for implementing cost effective and flexible high volume additive manufacturing systems. The modular Print Engine consists of process controls and print modules enabling simultaneous printing on up to 4 different substrates, or sequential printing of up to 4 different materials on the same substrate all on one machine. The Print Engine also provides an ‘open systems’ architecture facilitating its integration with custom or standard commercial automation platforms making it ideally suited for the FAPS application. Aerosol Jet technology is also available in turnkey bench top and full lab system configurations suited for R&D and rapid prototyping. Click here for more information on Aerosol Jet technology.

“As Aerosol Jet printing technology allows the manufacturing of homogeneous layers with a thickness below 10 microns, the process seems very well suited to print stacked DEA composed of Silicone layers as dielectric medium and Carbon Nano Tube (CNT) compounded silicone electrodes,” said Dr. Sebastian Reitelshöfer, Director of the Research Sector Biomechatronics at FAPS. “We believe this will be an important element in the successful production ramp up of DEA-based applications.”

“We’re pleased to see the unique capabilities of Aerosol Jet technology being applied to the exciting area of DEAs and helping develop production grade manufacturing environments for their implementation,” said Ken Vartanian, VP of Marketing at Optomec. “The research being done at FAPS holds great potential for many life-changing innovations and we’re proud to be contributing to accelerate the commercial viability of this work.”

About FAPS

The FAPS institute was founded in 1982 under the supervision of Prof. Dr.-Ing. Klaus Feldmann as part of the newly established Production Technology field at Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU). The institute’s overarching objective is the integration of all the manufacturing factory functions for a comprehensive computer-integrated concept. Its focus remains on research of innovative and interdisciplinary manufacturing process approaches to mechatronics products. More information can be found here: http://www.faps.de/2/home/index.html.

About Optomec

Optomec is a privately-held, rapidly growing supplier of production grade Additive Manufacturing systems. Optomec patented Aerosol Jet systems for printed electronics and LENS 3D Printers for metal components are used by industry to reduce product cost and improve performance. Together, these unique printing solutions work with the broadest spectrum of functional materials, ranging from electronic inks to structural metals and even biological matter. Optomec has more than 150 marquee customers around the world, targeting production applications in the Electronics, Energy, Life Sciences and Aerospace industries. For more information about Optomec, visit http://optomec.com.

via Businesswire

Wöchentlicher 3Druck.com Newsletter

Keine News mehr versäumen: Wir liefern jeden Montag kostenlos die wichtigsten Nachrichten und Informationen zum Thema 3D-Druck in Ihr Postfach.

Wir senden keinen Spam! Mit dem Absenden des Formulars akzeptieren Sie unsere Datenschutzbestimmungen.

Keine News mehr versäumen!

Wir liefern wöchentlich kostenlos die wichtigsten Nachrichten und Informationen zu dem Thema 3D-Druck in Ihr Postfach. HIER ANMELDEN. Wir sind auch bei LinkedIn zu finden. Sie können uns hier folgen!